Laufzeitrechner für Bleisäure-, Lithium- und LiFePO4-Batterien

Holen Sie sich Massenrabatte auf Lithium batterien. Klicken Sie hier, um Ihren Großhandelspreis zu berechnen!

Batterielaufzeitrechner: Wichtigkeit der Auswahl von Unterschieden zwischen den Batterie -Typen

Blei-Säure-Batterien

Lead acid batteries, a time-tested technology, have been in use since their invention in 1859 by French physicist Gaston Planté. Their reliability and relatively low cost make them a secure and financially savvy choice for many applications. Lead acid batteries are commonly found in:

• Automobile: Die meisten Autobatterien bestehen aus Bleisäure und liefern die nötige Energie zum Starten des Motors und zum Betreiben der Fahrzeugelektronik.
• Backup-Stromversorgungssysteme: Sie werden häufig in unterbrechungsfreien Stromversorgungen (USV) zur Notstromversorgung eingesetzt.
• Speicher für erneuerbare Energien: Blei-Säure-Batterien speichern Energie in Solar- und Windkraftanlagen.

One of the main characteristics of lead acid batteries is their heavy weight and large size compared to other battery types. They have a lower energy density, meaning they store less energy per unit of weight. For example, a typical lead acid battery might weigh between 15 and 30 kilograms. The electrolyte in these batteries is sulfuric acid, and the battery’s operation involves a chemical reaction between the lead plates and the acid. Lead acid batteries have a cycle life of about 300 cycles, which means they can be charged and discharged about 300 times before their performance significantly declines. They also require regular maintenance. They also have a lower efficiency, with around 80% of the energy put into the battery being retrievable.

Lithium batterien

Lithium batteries, a more modern and high-performance technology, are known for their high energy density, lightweight, and long lifespan. These characteristics instill confidence and reassurance in their performance and longevity. Advantages of lithium batteries over lead acid batteries include:

• Höhere Energiedichte: Lithium batterien speichern mehr Energie in einem kleineren und leichteren Paket.
• Längere Lebensspanne: Sie halten normalerweise länger und haben mehr Lade-Entlade-Zyklen.
• Schnelleres Laden: Lithium batterien können schneller sein als Blei -Säure -Batterien.
• Weniger Wartung: Sie erfordern weniger Wartung und haben keinen Memory-Effekt.

Lithium batteries are widely used in consumer electronics, electric vehicles, and renewable energy systems. They can last up to 1000 to 2000 cycles, significantly longer than lead acid batteries. Their higher efficiency, around 90%, means more of the energy put into the battery can be used.

LiFePO4-Batterien

LiFePO4 batteries, also known as lithium iron phosphate batteries, are an advanced type of lithium battery. Their safety and durability make them a secure and confident choice for high-demand and critical applications. Benefits of LiFePO4 batteries include:

• Sicherheit: Sie sind stabiler und weniger anfällig für thermische Ausreißere oder fangen Feuer als andere Lithium-Ionen-Batterien.
• Lange Lebensspanne: LiFePO4 Akkus können Tausende von Lade-Entlade-Zyklen überstehen, was sie sehr langlebig macht.
• Großer Temperaturbereich: Sie funktionieren gut über verschiedene Temperaturen hinweg.
• Hohe Entladeraten: Diese Batterien können eine hohe Ausgangsleistung für anspruchsvolle Anwendungen bieten.

LiFePO4 batteries have a very long cycle life, often exceeding 2000 cycles, and can maintain about 80% of their capacity even after extensive use. They can handle high discharge rates and be used in extreme temperatures ranging from -20°C to 75°C. Their efficiency is the highest among the discussed types, reaching up to 95%. LiFePO4 batteries are commonly used in applications where safety and longevity are critical, such as:

• Elektrische Fahrzeuge: Bereitstellung einer sichereren und langlebigeren Stromquelle.
• Energiespeichersysteme: Diese werden in der Lagerung zu Hause und im industriellen Speicher für erneuerbare Energien eingesetzt.
• Marine- und Wohnmobilbatterien: Anbieten zuverlässiger Freizeitfahrzeug und Bootsstrom.

In summary, understanding the differences between these types of batteries is crucial for selecting the right one for your needs. Lead acid batteries are a reliable, cost-effective choice for many traditional applications. Lithium batteries offer higher performance and longer life, making them ideal for modern electronic devices and electric vehicles. LiFePO4 batteries enhance safety and durability, making them perfect for high-demand and critical applications.

Batterielaufzeitrechner: Die Rolle von Kapazität, Spannung, Effizienz und Lastleistung

Batteriekapazität

Batteriekapazität measures the amount of energy a battery can store. It is usually expressed in ampere-hours (Ah), which indicates how much current a battery can supply over a specific period. For example, a battery with a capacity of 10 Ah can deliver 10 amperes for one hour or 1 ampere for 10 hours. Knowing the battery capacity is crucial because it helps determine how long the battery will last under a given load. Standardized tests are conducted to measure battery capacity, such as the 20-hour rate test. This test involves discharging the battery at a constant current until it reaches a specific cutoff voltage. For instance, a 100 Ah battery would be discharged at 5 amps (100 Ah / 20 hours = 5 amps). The capacity is then calculated based on the discharge current and time.

Batteriespannung

Battery voltage is the electrical potential difference between a battery’s positive and negative terminals. It is measured in volts (V). A battery’s voltage affects its ability to deliver power to a load. Higher-voltage batteries can provide more power, making them suitable for high-power applications. Typical battery voltage levels vary based on their type and application. For example, lead-acid batteries often come in 12V configurations, while lithium-ion batteries can be found in various voltages, such as 12V, 24V, 36V, and 48V. The voltage also influences the battery’s efficiency and performance, impacting the overall runtime.

Batterieeffizienz

Battery efficiency refers to the percentage of energy stored in the battery that can be retrieved during discharge. Different types of batteries have varying efficiency levels. For example, lead-acid batteries typically have an efficiency of around 80%, meaning 80% of the energy put into the battery is retrievable. In contrast, lithium-ion batteries have higher efficiency, often around 90%, and LiFePO4 batteries can reach up to 95%. Efficiency is critical in determining how effectively a battery can power a load. High-efficiency batteries waste less energy, providing more usable power and extending the battery’s runtime.

Ladeleistung

Load power is the amount consumed by the device or system connected to the battery. It is measured in watts (W). Load power directly affects the battery’s discharge rate and, consequently, its runtime. A higher load power will deplete the battery faster, while a lower load power will allow the battery to last longer. For example, if a device consumes 50 watts and is connected to a 12V battery, it will draw approximately 4.17 amperes (50W / 12V = 4.17A). The battery’s capacity and efficiency determine how long it can sustain this load before recharging.

Warum diese Faktoren im Rechner wichtig sind

The Lead Acid, Lithium & LiFePO4 Battery Run Time Calculator uses these four factors—Batteriekapazität, voltage, efficiency, and load power—to estimate how long a battery will last under a specific load. Here’s why each factor is essential:

1. Batteriekapazität: Bestimmt die für die Last verfügbare Gesamtenergie.
2. Batteriespannung: Beeinflusst die Leistungsabgabe und die Kompatibilität mit der Last.
3. Batterieeffizienz: Beeinflusst die Menge der nutzbaren Energie und die Gesamtleistung.
4. Ladeleistung: Diktiert die Entladungsrate der Batterie.

The calculator applies the formula: Capacity (Ah) x Voltage (V) x Efficiency / Load Power (W). This equation gives an estimated runtime based on the input values. For instance, a 100 Ah battery at 12V with 90% efficiency powering a 50W load would have a runtime of (100 Ah x 12V x 0.9) / 50W = 21.6 hours. In conclusion, while this calculator provides a proper estimate, actual performance can vary based on environmental conditions and specific use cases. For precise calculations and professional advice, please contact our customer service at https://manlybattery.com/contact-us/.